PRODUCTS
Door Draft Stopper
Door Vest for Blocking Draft
This is a non-adhesive weather strip made with non-cross materials.
As a weather strip for the lower part of a door, it prevents the wind from an air conditioner from getting out of the room in summer and completely blocks the wind blowing in through the crevices in winter.
Product Explanation
SIZE13cm x 98cm (size controllable)
MaterialsPoly urethane / White release paper
ColorBrown
Product Merits
Doubly block the draughts blowing in through the lower part of the door
In the case of a house without thresholds, the gap at the door bottom is very large and a draught naturally comes in as it is.
In such cases, we strongly recommend for you to use door vests which block drafts doubly at the front and back of the door.
Non-adhesion environment-friendly weather strip
Unlike other weather strips, our products are environment-friendly weather strips which block drafts without adhesion.
Cut the foam material according to the door size and push the door vest under the door to complete installation.
Use thick foaming materials
Thick foam materials which almost can’t be compared with other weather strips are used.
Thick foam materials with a diameter of 30mm completely block the wind at the front and back of the door in winter or prevents the wind from the air conditioner from leaking outside in summer.
